Factory Audit Brief for Custom Bag Buyers
Compliance & Certification
Define the audited site, audit scope, evidence access and corrective-action review before choosing a custom bag supplier.
A factory audit is a snapshot of one site, on one date, against one defined scope — not a blanket assurance that every product conforms or every shipment passes. For a custom bag buyer, the value of an audit is the evidence it produces and the corrective-action loop that follows, not the scope or report itself. This brief sets out how to define the audited site, choose the audit purpose and protocol, agree evidence access, and review findings so the result supports a sourcing decision rather than replacing it.
Stage 1 — Identify the audited site and operation scope
Record the legal entity name, the registered business address, and the physical site where the audit will take place, because an audit covers a specific location and the operations performed there. Confirm which operations are in-house and which are outsourced, and whether any subcontracted process relevant to your bag (cutting, welding, printing, embroidery) sits at a different site that the audit will not reach. A report that names a trading entity but audits a workshop address, or that omits an outsourced welding line, describes only part of the supply chain. Match the audited site to the entity you intend to place the order with, and record any operation that falls outside the audit scope so the gap is visible rather than assumed away.
Stage 2 — Choose the audit purpose, auditor and protocol
Audits answer different questions, so choose the purpose before booking. A social or workplace audit assesses labour conditions, health and safety, and ethical practices at the site. A quality management system audit assesses whether documented processes for production control, inspection, and corrective action exist and are followed. A product test evaluates a specific sample against a standard. A shipment inspection checks a finished lot before dispatch. These are distinct activities with distinct evidence; conflating them produces a report that proves less than it appears to. Once the purpose is set, agree the auditor, the protocol or standard version, and who is responsible for booking, fees, and the audit date. Record the protocol version, because a methodology revised after the booking changes what the report covers.
Stage 3 — Agree evidence access and confidentiality
Before the audit, agree what documents the auditor may access, how confidentiality is handled, and who may receive the report. Buyer-relevant documents — business licence, quality manual, production records, inspection reports, labour and safety records — are reviewed against the protocol, with personal records handled under agreed confidentiality and minimum-necessary-access terms rather than published wholesale. Confirm whether the report is shared with the buyer, held only by the auditor, or published on a membership platform, and agree the permission for each. A report you cannot read cannot inform a sourcing decision, so resolve access before the audit runs rather than after.
Stage 4 — Review findings and corrective actions
A finished report lists dated findings, each with a cause, an action owner, a due point, and a closure status. Review each finding against the agreed scope: does it affect the process or product you are buying, and is the corrective action verifiable? Record which findings are open, which are closed with evidence, and what follow-up scope remains — a re-audit, a document review, or a closure check at the next visit. A finding closed on paper without evidence of the correction is an open risk, and a report with no findings at all deserves the same scrutiny as one with many. The corrective-action loop is what turns an audit from a document into a control, so agree who tracks closure and on what timeline before the report is filed.
Evidence, verification and limits
The table below pairs each piece of audit evidence with what to verify and where its limit lies, so the report is read for what it actually proves.
| Evidence | Verify | Limit |
| Report site and date | Matches the legal entity and physical site you intend to order from | An audit at one site does not cover a different or subcontracted site |
| Scope and protocol version | States the audit purpose, standard and edition used | A social audit does not assess product quality; a quality audit does not certify the product |
| Auditor identity and report | Auditor is independent and the report is verifiable or authorized for your access | A report you cannot read or verify cannot support a decision |
| Findings and corrective actions | Each finding has a cause, owner, due point and closure evidence | Closure on paper without evidence is an open risk; no findings also warrants scrutiny |
What an audit is, and is not
An audit is site-specific, scope-specific, and date-specific. It records what the auditor observed at that site on that day against that protocol — it is not proof that every product conforms to a specification, that every shipment will pass inspection, or that the factory will operate identically next season. Distinguish the four activities clearly: a social audit covers workplace and labour conditions; a quality management system audit covers process documentation and control; a product test evaluates a sample against a standard; and a shipment inspection checks a finished lot before dispatch. A social audit report is not a product certificate, and a quality system audit is not a shipment release. Treat each as evidence for one question, and combine them where a program needs more than one answered.
SMETA, Sedex, and amfori BSCI
SMETA (Sedex Members Ethical Trade Audit) is a methodology for social audits, not a product certificate and not a pass or fail endorsement of a factory. Sedex is a membership organization that hosts audit data and the SMETA methodology; Sedex membership alone does not prove an audit was conducted — only a dated, site-specific SMETA report, verifiable through the platform or auditor, is evidence that a social audit took place, and even that report is an audit-methodology output, not a certification of the product or a guarantee of ongoing conditions. amfori BSCI is an audit and improvement programme for social compliance, not a product certification; its current booking process and participant roles are described at the official amfori source. Route current booking questions, eligibility, and programme details to the official sources rather than inferring them from a report. These references explain how each programme works so a buyer can verify what a report means; they do not imply that any specific supplier holds a particular programme status, which must be confirmed per supplier and per report.
Primary references: Sedex — what we do explains the Sedex platform and SMETA methodology, and amfori — how to request an audit as a producer describes the amfori BSCI audit request process. Consult them for current programme terms before relying on a report.
Related guides
Use this audit brief alongside the supplier verification checklist for factory and production capability checks, the quality control plan for inspection ownership, and the AQL inspection checklist for shipment sampling. The OEM and ODM service scope sets out the development and production relationship an audit informs.
Send the site, audit purpose and requested evidence-access requirements with your brief to sales@xmronta.com.
Frequently Asked Questions
Does a factory audit cover the company or just one site?
An audit covers the specific site and operations defined in its scope, not the entire corporate entity. Record the legal entity, the physical site, and any outsourced process that falls outside the audit, so the gap is visible rather than assumed away. A report on one workshop does not describe a different or subcontracted site.
What is the difference between a factory audit and a shipment inspection?
A factory audit assesses a site against a defined scope on a given date — social conditions, a quality management system, or capability. A shipment inspection checks a finished lot against an agreed sampling plan before dispatch. They answer different questions: an audit is not a shipment release, and a shipment inspection is not a site audit.
Who can access the audit report?
Access is agreed before the audit runs. Confirm whether the report is shared with the buyer, held by the auditor, or published on a membership platform, and agree the permission for each. Personal records are handled under agreed confidentiality and minimum-necessary-access terms, not published wholesale; buyer-relevant documents are reviewed against the protocol. A report you cannot read cannot inform a sourcing decision.
Is a SMETA or Sedex report a certificate that proves compliance?
No. SMETA is a social audit methodology, and Sedex is a membership organization that hosts audit data. Sedex membership alone does not prove an audit was conducted; a dated, site-specific SMETA report is evidence a social audit took place, not a product certificate or a pass/fail endorsement of ongoing conditions. Confirm what a report covers and when it was conducted before relying on it.
How are corrective actions closed after an audit?
Each finding carries a cause, an action owner, a due point, and a closure status. Review which findings are open, which are closed with evidence, and what follow-up scope remains. A finding closed on paper without evidence of the correction is an open risk. Agree who tracks closure and on what timeline before the report is filed.
Review a Bag Supplier Audit Brief
Email: sales@xmronta.com
Browse the site: Home · Bags Manufacturing · Portfolio · Knowledge Base · FAQ · OEM & ODM Service · Contact · Our Factory